The following 40 second video clips are close-up views of high speed performance milling. The clear coffee cup provides a visual indication of the rock steady performance while operating. The video permits you to see exactly how a Phoenix Machine Tool performs under a variety of circumstances. If you would like to receive a CD copy of these videos, please register at: registration
If you do not have Quicktime on your computer, click here to download. Right click on the videos and select "Save Target As" to save them to your computer. These videos are high quality and will take a few minutes to download. Once they are saved to your computer, you can open them in Quicktime.
 |
4140H 30 HP TEST CUT This is a video clip of a 4 inch standard carbide cutter, machining a 3.8 inch wide piece of 4140H steel, 0.100 inches deep at 45 inches a minute with a spindle speed of 935 RPM. See the actual video of this 40 second high speed pass. To download the video, right click here and select "Save Target As". This is a 12 meg file. At DSL speeds, it is approximately 3-4 minutes to download. At modem speeds, it might be 5 times longer. |
 |
416 STAINLESS 30 HP TEST CUT This is a video clip of a 4 inch standard carbide cutter, machining a 2.0 inch wide piece of 416 stainless steel, 0.200 inches deep at 45 inches a minute with a spindle speed of 935 RPM. See the actual video of this 40 second high speed pass. To download the video right click here and select "Save Target As". This is a 12 meg file. At DSL speeds, it is approximately 3-4 minutes to download. At modem speeds, it might be 5 times longer. |
 |
300 IPM MERCEDES TEST CUT This is a video clip of a 300 inch per minute 3 dimensional cut, machining aircraft aluminum with a 0.5 inch ball nose cutter at 300 inches a minute with a spindle speed of 10,000 RPM. See the actual video of this 40 second high speed pass. To download the video, right click here and select "Save Target As". This is a 12 meg file. At DSL speeds, it is approximately 3-4 minutes to download. At modem speeds, it might be 5 times longer. |
 |
RIGID TAP TEST CUT This is a video clip of three rigid taps, 1/2-13 UNC-2B into 4140H stainless. Each tap is 30mm deep, tap speed is 700 RPM. See the actual video of this 40 second high speed pass. To download the video, right click here and select "Save Target As". This is a 12 meg file. At DSL speeds, it is approximately 3-4 minutes to download. At modem speeds, it might be 5 times longer. |